Machinery

FLETCHER 2200 MOUNTCUTTER

When it comes to manual cutting, no one in the industry even comes close to Fletcher’s 2200 unit, recognized as the industry performance standard in the global framing market.

Our 2200 Mount Cutter provides specialty cutting for creating bevels and producing V-Grooves for picture and art framing. It features a dual cutting head with a large finger grip pad for maximum comfort and control. One side of the cutting head is used to cut the bevels and V-Grooves, the other side features a 90° cutting blade magazine for mountboard sizing plus the ability to cut formboard up to ½” (13mm).
Machinery Available to order (2-3 weeks)

FLETCHER 3100 WALLMOUNTED BOARD & GLASS CUT

Multi-Material Cutter features a spring-loaded cutting assembly with an interchangeable pillar post allowing you the convenience of quickly switching from one material to another.

• Interchangeable Cutting Head Technology
• Cuts clean, debris-free, no secondary processing
• Optional laser sight line for accurate cutting
• Mounts on wall or free-standing
• Cuts wide range of substrates

Machinery Available to order (2-3 weeks)

MORSO F MITRING MACHINE

Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees.

Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.
Machinery Available to order (2-3 weeks)

BAMBI COMPRESSOR BB50D

Designed to require minimal maintenance and to ensure years of trouble free use, meets the needs of many applications including; air-brushing, exhibition stands, glue dispensing, pneumatic controls, stapling – anywhere where compressed air is needed silently!

• Easy to use
• Internally Coated Air Receiver
• Clearview Oil Level Check
• Easy to use Oil Filler Plug
• 10 Micron Outlet Filter & Adjustable Pressure Regulator

Machinery Available to order (2-3 weeks)

MORSO EH MITRING MACHINE

Morso Model EH mitring machine is a fully automatic electric/hydraulic mitring machine, with a noise level below 70db - the perfect machine to cut picture mouldings in production - wooden, plastic and MDF mouldings.

In principle Morso EH does the same work as the Morso F, but with the Morso EH you have your work done automatically by pushing two push buttons. The Morso EH is safe to operate as you must activate both push buttons at the same time to have the machine work, and therefore you cannot get your fingers underneath the knives. With the Morso EH you can do production all day long.
Machinery Available to order (2-3 weeks)

MORSØ F PLUS TEN

MORSØ F PLUS TEN cuts double miter at 45° and single miter up to 90°. Tenon, mortise joints and a wide variety of angled cuts can also be made. Cuts hard wood, soft wood, plastic and MDF. The latest machine in the MORSØ range is the manually operated MORSØ F PLUS TEN, which works after the same principles as the MORSØ F. The difference is that the height of the working table has been raised by 100 mm (4”).
Machinery Available to order (2-3 weeks)

Very important: The working height of the foot pedal is still the same, compared to the standard Morsø F. Especially for taller people the change of height makes the MORSØ F PLUS TEN extremely more convenient and ergonomic to work with. Operators working the machines more than 1 hour a day need the best possible working conditions and this has now been achieved with the extra height.

See DATASHEET PDF

MORSØ-E Future Green

MORSØ-E Future Green is a fully automatic, electric miter machine with a dual hand release. This makes the machine absolutely safe to operate as it is impossible to start the machine and touch the knives at the same time.

With MORSØ-E Future Green you achieve a clean, smooth cut as the work piece is automatically cut twice as long as both push buttons are activated at the same time . The cutting time varies from 1 second and up, depending on the thickness of the work piece. Having finished the cutting, the knife block automatically returns to the starting position.

See DATASHEET PDF

The starting position is horizontally adjustable up to 60 mm (2.4’’). Maximum width of the work piece is 100 mm (4’’). From a 60 mm (2.4’’) width, the MORSØ-E Future Green will automatically cut the work piece bit by bit. The variable starting position is adjusted by a handle.

The vertical movement of the knives is also adjustable with three different heights. One for small work pieces, a second for medium-sized work pieces and a third for very thick work pieces (up to 180 mm / 7’’).
Machinery Available to order (2-3 weeks)

Morso digital measuring system

You can now have your new Morso mitring machine delivered with manually operated digital measuring system. This digital measuring system is also available as a subsequent installation on to all existing Morso machines in the market, no matter how old the machine is.

The manually operated digital measuring system consists of two units, which are also available separately. The manually operated digital measuring system for the in- and outside measurement, (DM 1500) is standard delivered in 1500 mm length. Upon request the system is also available up to as long as 6000 mm. When ordering DM 1500, the unit is delivered complete and ready to use. Aluminium fence, magnetic tape, stop ruler and obviously the digital display is all included. The aluminium fence is easily fitted as it uses the existing holes which are used for the existing measuring system.

See DATASHEET PDF

The manually operated digital measuring system for measuring the width of the rebate, uses the same principle, and is easily fitted, using the existing holes in the left side of the cast iron table. To read the width of the rebate, the moulding is placed against the fence, and then the reader is moved towards the rebate. When the unit touches the rebate the correct width can be seen on the display. The manually operated digital easuring unit for reading the width of the rebate is item code DR 100. When ordering this unit, it is delivered complete, ready to use, which means reading unit, display, fittings etc. is all included.

The digital system is easy and simple to use, it reduces the risk for mistakes when reading the numbers on your aluminium ruler, and especially the digital system will save you a lot of time when changing the lengths and widths. Not to mention that the precision is unique as the display can show up to 0.01 mm.
Machinery Available to order (2-3 weeks)